You can bookmark this page (ctrl-D) to avoid having to register again in the future.
 

Drivers for LabView 6.1 Serial (RS-232/485) Applications

Twenty-two sub-vi driver programs that may be loaded into your LabView application.

• Includes seventeen sub-vis to set or read-back any power supply function.

• Command error and status checking using standard LabView methods.

• Uses the NI-VISA API.

• Includes a simple button-driven program that demonstrates each driver.

• Source code included.

Required: National Instruments LabView 6.1.

Click to get self extracting file (584KB): GEN-Serial-LV6p1-Drivers-RevAbeta1.exe

Drivers for LabView 6.1 IEEE-488 Applications (current rev)

Twenty-two sub-vi driver programs that may be loaded into your LabView application. Compatible with Genesys™ power supplies with IEEE rev “B” and above (explain IEEE Rev).

• Includes seventeen sub-vis to set or read-back any power supply function.

• Command error and status checking using standard LabView methods.

• Uses the NI-VISA API.

• Includes a simple button-driven program that demonstrates each driver.

• Source code included.

Required: National Instruments LabView 6.1 and IEEE controller card.

Click to get self extracting file (508KB): GEN-IEEE-LV6p1-Drivers-RevDbeta1.exe

Drivers for LabView 6.1 IEEE-488 Applications (early rev)

Twenty-two sub-vi driver programs that may be loaded into your LabView application. Compatible with Genesys™ power supplies with earlier IEEE rev “14” and above (explain IEEE Rev).

• Performance is slowed to be compatible with early IEEE rev “14” power supplies
• Includes seventeen sub-vis to set or read-back any power supply function.
• Command error and status checking using standard LabView methods.
• Uses the NI-VISA API.
• Includes a simple button-driven program that demonstrates each driver.
• Source code included.

Required: National Instruments LabView 6.1 and IEEE controller card.

Click to get self extracting file (508KB): GEN-IEEE-LV6p1-Drivers-RevC.exe

Drivers for LabWindows 6.0 IEEE-488 Applications

Source, header and function panel files that may be loaded as an instrument into your LabWindows project.

• Function Panel includes 35 selections to set or read-back any power supply function.
• Command error and status checking using standard LabWindows methods.
• Uses the NI-VISA API.
• Includes a simple button-driven program that demonstrates each function
• Includes a limited-function “GUI” demonstration program
• Source code included.

Required: National Instruments LabWindows 6.0 and IEEE controller card.

Click to get file (61KB): GEN-IEEE-LW6p0-Drivers-RevA.zip

GUI Demo Program for the Serial Bus (executable only)

A Graphical User Interface program that is a remote power supply front panel.

• Control 1 to 30 power supplies on a Serial (RS-232 or RS-485) bus
• Continuously programs all settings made using the GUI window controls.
• Continuously reads back the power supply state and updates the GUI window indicators, even in local mode.
• Uses complete power supply and VISA error reporting.
• Source code not included.

Required: National Instruments LabView 6.1 program or its Runtime Engine (see runtime install below)

Click to get the self extracting file (248KB): GEN-Serial-GUI-RevAbeta1.exe

GUI Demo Program for the Serial Bus (runtime install)

A Graphical User Interface program that is a remote power supply front panel.

• Control 1 to 30 power supplies on a Serial (RS-232 or RS-485) bus
• Continuously programs all settings made using the GUI window controls.
• Continuously reads back the power supply state and updates the GUI window indicators, even in local mode.
• Uses complete power supply and VISA error reporting.
• Source code not included.
• Installs the required LabView 6.1 and VISA 2.6.0 Runtime Engines. These engines are required if you do not have LabView 6.1 on your computer or if they have not been installed by a prior download.

Click to get the self extracting file (6.9MB): GEN-Serial-GUI-Runtime-RevAbeta1.exe

GUI Demo Program for the IEEE-488 Bus (executable only, current rev)

A Graphical User Interface program that is a remote power supply front panel. Compatible with Genesys™ power supplies with IEEE rev “B” and above (explain IEEE Rev).

• Control one power supply on a IEEE-488 (GPIB) bus
• Continuously programs all settings made using the GUI window controls.
• Continuously reads back the power supply state and updates the GUI window indicators, even in local mode.
• Uses complete power supply and VISA error reporting.
• Source code not included.

Required: National Instruments LabView 6.1 program or its Runtime Engine (see runtime install below) and IEEE controller card with NI-488.2 compatible drivers.

Click to get the self extracting file (220KB): GEN-IEEE-GUI-RevDbeta1.exe

GUI Demo Program for the IEEE-488 Bus (executable only, early rev)

A Graphical User Interface program that is a remote power supply front panel. Compatible with Genesys™ power supplies with earlier IEEE rev “14” and above (explain IEEE Rev).

• Control one power supply on a IEEE-488 (GPIB) bus
• Continuously programs all settings made using the GUI window controls.
• Continuously reads back the power supply state and updates the GUI window indicators, even in local mode.
• Uses complete power supply and VISA error reporting.
• Source code not included.
• Slowed down to be compatible with Genesys™ power supplies with IEEE rev “14” (explain IEEE Rev).

Click to get the self extracting file (220KB): GEN-IEEE-GUI-RevC.exe

GUI Demo Program for the IEEE-488 Bus (runtime install, current rev)

A Graphical User Interface program that is a remote power supply front panel. Compatible with Genesys™ power supplies with IEEE rev “B” and above (explain IEEE Rev).

• Control one power supply on a IEEE-488 (GPIB) bus
• Continuously programs all settings made using the GUI window controls.
• Continuously reads back the power supply state and updates the GUI window indicators, even in local mode.
• Uses complete power supply and VISA error reporting.
• Source code not included.

• Installs the required LabView 6.1 and VISA 2.6.0 Runtime Engines. These engines are required if you do not have LabView 6.1 on your computer or if they have not been installed by a prior download.

 Click to get the self extracting file (6.9MB): GEN-IEEE-GUI-Runtime-RevDbeta1.exe

GUI Demo Program for the IEEE-488 Bus (runtime install, early rev)

A Graphical User Interface program that is a remote power supply front panel. Compatible with Genesys™ power supplies with earlier IEEE rev “14” and above (explain IEEE Rev).

• Control one power supply on a IEEE-488 (GPIB) bus
• Continuously programs all settings made using the GUI window controls.
• Continuously reads back the power supply state and updates the GUI window indicators, even in local mode.
• Uses complete power supply and VISA error reporting.
• Source code not included.
• Slowed down to be compatible with Genesys™ power supplies with IEEE rev “14” (explain IEEE Rev).
• Installs the required LabView 6.1 and VISA 2.6.0 Runtime Engines. These engines are required if you do not have LabView 6.1 on your computer or if they have not been installed by a prior download.

Click to get the self extracting file (6.9MB): GEN-IEEE-GUI-Runtime-RevC.exe

© Copyright 1999-2008 Lambda Americas Inc. 
All rights reserved. Legal Information